Fridge breakage is always associated with great inconvenience. Not many have a spare freezer, and refrigerator repairs can take hours to days. In order for your refrigerator to serve for a long time and be trouble-free, you need to follow several important rules outlined in the “Operation Manual” that is included with each refrigerator. Statistics show that more than 50% of faults can be avoided by following the specified requirements of refrigerator repair, which are divided into installation rules and operating rules.
-
Refrigerator installation requirements
The refrigerator must be installed in a place inaccessible to direct sunlight, at a distance of at least 20 inches from the lighting and heating devices (gas and electric stoves, heating radiators).
It is also wrong to install the product on a “warm floor”. Try to place the refrigerator so that there is free space above and on the sides for air circulation. It is better to install the refrigerator in non-residential (kitchen) premises with stable humidity, ambient temperature and constant voltage of the electrical network. LG repair center will help you to solve that problem.
-
Water drainage system cleaning rules
The refrigerator compartment uses an automatic defrosting system. The frost periodically turns into water droplets on the back of the refrigerator, which drain into the drain pan. However, if you find a small amount of water in the refrigerator compartment, then you need to clean the water drain system. This simple operation upon the advice of Whirlpool repair specialists can be performed by users independently:
- Disconnect the refrigerator from the electrical network, remove the food from the chamber and move it away from the wall;
- Place any container under the drain gutter;
- Clean the drain hole and rinse with warm water; repeat the procedure several times until the water in the vessel becomes clear;
- Remove water from the container on the compressor with an easily absorbent material;
- Wash the camera and wipe dry.
-
Refrigerator defrosting rules
Defrost the refrigerator periodically. The layer of frost that appears during operation on the walls of the refrigerating chamber must be removed. Snow build-up may cause the refrigerator to consume more energy and the time it takes to freeze food may double.
The more frost settles on the walls, the more time and effort you will spend on defrosting the refrigerator. We advise you to buy refrigerators with the “No frost” system, such refrigerators require defrosting much less often: KitchenAid repair near you will always give you useful advice.
- Unplug the refrigerator from the electrical outlet and remove the food;
- Allow the refrigerator to defrost completely naturally; under no circumstances use metal objects and containers with hot water for defrosting, this can lead to mechanical damage to the evaporator and disruption of the cooling process; the “No frost” system requires more rare, but longer defrosting;
- Wash the refrigerator compartment with warm water and a small amount of detergent; it is not recommended to use abrasive pastes, detergents containing acids and solvents, as well as dishwashing detergents, which can cause an unpleasant smell in the refrigerator, when washing the refrigerator;
- Before turning on the refrigerator, thoroughly dry the refrigerator, otherwise the water will form an ice build-up and you will have to defrost the refrigerator again;
- The compressor and the heat exchanger grill must be thoroughly cleaned with a vacuum cleaner.
There are special products for the care of refrigerators, which are developed and recommended by world manufacturers of household appliances. With their help, you can safely clean the refrigerator surfaces, protect them from bacteria and prevent unpleasant odors in the refrigerator compartment.
By following the above simple rules, you extend the lifespan of the refrigerator! But if your refrigerator is out of order, call +1 (503) -512-5900. The master is ready to come at any time!
