...
In need of appliance repair? We offer same day service. Call us or leave a request right now!

Whirlpool Dishwasher Is Not Working: What’s Happening?

The brand is one of the best manufacturers of home appliances, particularly dishwashers. At the same time, even the highest quality equipment is not immune to breakdowns: Whirlpool dishwasher not washing, does not start or complete a cycle, stops working in the middle of the cycle, and more. If you are faced with such a problem, you need to know how to solve this problem correctly and what causes such malfunctions. Our Whirlpool repair center will tell you about it in this article.

TOP 5 Dishwasher Failures

The Whirlpool dishwasher is not working for a variety of reasons. This article will address the most common issues that can cause appliances to stop working. 

Reason #1: The Appliance Has a Broken Power Supply

If you are faced with the fact that Whirlpool dishwasher is not turning on, then the problem may be that there is insufficient power, or it is not supplied. The equipment in question needs constant and optimal power to function correctly. Determining the power supply problems is quite simple:

  1. Inspect the cable for damage. It may be trivial, but it’s worth ensuring the plug is firmly in the outlet. Never use extension cords to plug in equipment – many fail to provide the necessary voltage.
  2. Check that the power switch is on. In some situations, this item is located under the sink in the kitchen cabinet.
  3. Locate the tripped circuit breaker. Check the circuit breaker box in the house; if necessary, reset it.
  4. Reset the equipment. In some situations, a reset can help solve the problem. You must unplug the equipment or turn it off with the circuit breaker. Then wait for 1 minute and turn it back on.

Contact the dishwasher repair center if you have some questions.

Reason #2: Incorrect Settings

If you encounter a problem that the Whirlpool dishwasher is not starting, then the problem may be in the wrong settings. Some settings are manually selected, while at the same time, specific settings may block immediate startup. The following parameters may prohibit the activation of the wash cycle:

  • the equipment is put into sleep mode;
  • on the control panel, the start of the wash cycle is delayed for a certain time;
  • control lock.

Suppose the error code is displayed on the panel in this situation. In that case, it is worth opening the user manual to understand the meaning of the numbers presented and determine the problem. If the control panel does not start at all, the reason may be the breakage or simply wet. A broken control panel needs to be replaced.

Reason #3: The Door Latch Is Broken

The Whirlpool dishwasher won’t start if the door is closed incorrectly. It would be best to lock the door securely without slamming it. Make sure that the latch works. If the door is closed tightly and the appliance doesn’t work, then the latch is the problem. If it is damaged or has no continuity when you check it with a multimeter, it needs to be replaced. 

Reason #4: No Water Supply

Even if the equipment is plugged in, correctly set up and locked in, it may not work. The main reason the Whirlpool dishwasher water is not coming in is if the technique starts or the chamber fills with water. The problem may be in the water supply or a closed water valve. 

Also, the technique can not drain water if the drain hose is kinked in any place or the water line is pinched, which limits the water supply. In this situation, it is necessary to fix all kinks. The problem may also be in the inlet valve. It must open and close properly. The water will not flow properly if it is in a closed position. It would be best if you changed the valve to a new one to solve the problem.

Reason #5: A Part Has Failed

If the Whirlpool dishwasher doesn’t turn on, a faulty part may also be the cause. Failure could be:

  • Timer. This element is responsible for activating specific functions at the right time. If broken, the equipment will not receive the necessary power to start.
  • An element responsible for the safety of equipment from overheating. The represented part most often burns out. If it is broken, the equipment can quickly overheat. You can check the serviceability of the thermal fuse with a multimeter.
  • Control panel that sets all commands. This computerized part controls all equipment options, directing the voltage to perform certain functions. If the main control board is broken, it cannot provide the power required for the equipment to start correctly. 

How to Troubleshoot a Whirlpool Dishwasher That Is Not Washing?

Whirlpool dishwasher troubleshooting not starting is quite a complicated process. The reasons can be different. If you have a lot of dirty dishes accumulated, and the equipment needs to be fixed, we suggest solving this problem in the following ways. We have collected for you the most effective tips from the experts. If none of the following works, you should seek help from the experts. 

No. 1: Check the Power Supply

If the Whirlpool dishwasher has no power, then the equipment will not start. In this situation, try unplugging the equipment and then plugging it back in. Doing this will reset any possible power failures that may occur due to a voltage drop or power outage. If the problem remains, it is worth checking in what state the wires are – check the fixing cords to the circuit board, and inspect the plugs to see whether they are in good condition in the sockets. It also does not hurt to check the thermal fuse. It is responsible for turning off the power in case of overheating. It is worth inspecting and replacing if necessary. 

Most often, the equipment does not work because of a loose wire. It is worth checking the connections and lugs for a loose connection or terminal. If you are well-versed in electrical work, it is worth looking for your circuit breaker’s fuse box. Flick the switches until you find the fuse block that is blown. The faulty ones are worth replacing. After that, it’s worth returning to your dishwasher to check the power supply and try to get it running again. 

No. 2: Make Sure the Water Supply Is Correct

Many appliance owners face a Whirlpool dishwasher not washing or no water. In this situation, it’s worth turning on the valve and checking for hose kinks, cracks and leaks. The problem may be in the supply valve if the water is flowing correctly. It is responsible for opening, closing, and pumping water into the machine during each wash cycle. 

No. 3: The Door Should Fit as Tightly as Possible

Often you may notice that the Whirlpool dishwasher will not start because its door needs to be closed tightly enough. Before starting the program of wash, it’s a good idea to ensure that the door is closed tightly on both sides and that all the commands on the panel are set correctly. Also, no objects should prevent the door from closing tightly. All the objects that may prevent the door from closing well must be removed. The problem may be in the seal or the latch if you cannot close the door. If, after the manipulations, the door still does not close as it should, then it is worth examining the seal itself. It is most likely what is causing the problem. 

Where Do I Go For Help if My Dishwasher Doesn’t Work?

If you are faced with a Whirlpool dishwasher not starting and need to know how to fix the appliances properly, it is best to contact a specialized company. Our appliance repair Portland specialists will solve any problems. You can safely contact our company for help. We work in the Portland and Seattle Metropolitan areas. 

We provide 24-hour service. If you need help, call the contact number (503) 512-5900 and our technician will shortly arrive on site. The appliance repair Lake Oswego  will quickly inspect your appliances and suggest the best way to fix the problem. Our company has been in the appliance repair business since 1999 and has made many customers happy. We have over 400 positive reviews on Google Maps. Appliance repair services Hillsboro will always be happy to help you at any time!